TOP 15 DIY Goat Toys Ideas [Easy To Make]

Hey there! If you’re anything like me, you know how important it is to keep our goats happy, active, and entertained. 

I’ve noticed that when goats are bored, they can get into all sorts of mischief, not to mention it’s not great for their overall health. 

Have you ever struggled with finding ways to keep your goats engaged? I sure have! That’s why I’ve put together this list of 15 awesome DIY goat toys that you can easily make at home. 

These fun and engaging toys will not only keep your goats entertained but also promote their physical and mental well-being. 

So, let’s dive in and get crafty with some fantastic ideas that will bring joy to your goats and peace of mind to you!

DIY Goat Toys Ideas

These are the best DIY goat toys that you can make to ensure endless enjoyment for your beloved animals.

1. DIY Goat Climbing Ramp

Materials Needed:

– Wooden planks

– Screws

– Nails

– Hammer

– Saw

– Measuring tape

– Sandpaper

– Paint (optional)

Procedure:

1. Measure the desired length and width of the ramp. Use the saw to cut the wooden planks to the appropriate size.

2. Lay two long planks parallel to each other as the sides of the ramp. Place smaller planks horizontally between them at intervals to create steps.

3. Use screws and nails to secure the horizontal planks to the sides. Ensure they are evenly spaced.

4. Sand down any rough edges to prevent splinters.

5. If desired, paint the ramp in a color of your choice.

6. Place the ramp in the goat enclosure at a slight incline for easy access.

2. DIY Goat Tire Climbing Tower

Materials Needed:

– Old tires

– Wooden planks

– Screws

– Nails

– Hammer

– Drill

– Measuring tape

– Sandpaper

– Paint (optional)

Procedure:

1. Gather old tires of similar sizes.

2. Wash and dry the tires thoroughly.

3. Drill holes in the tires to allow for drainage and prevent water accumulation.

4. Stack the tires on top of each other.

5. Use wooden planks and screws to secure the tires together at multiple points, creating a stable structure.

6. Sand down any rough edges on the wooden planks.

7. Paint the tires and planks if desired.

8. Position the tire tower in the goat enclosure.

3. DIY Goat Playground Bridge

Materials Needed:

– Wooden planks

– Rope

– Screws

– Nails

– Hammer

– Saw

– Measuring tape

– Sandpaper

– Paint (optional)

Procedure:

1. Measure and cut the wooden planks to the desired length and width for the bridge.

2. Drill holes at the ends of each plank for the rope to pass through.

3. Thread the rope through the holes in each plank, leaving enough slack for the bridge to sway slightly.

4. Knot the rope at the ends of each plank to hold them in place.

5. Securely attach the ends of the ropes to sturdy posts or trees in the goat enclosure.

6. Sand down any rough edges on the planks.

7. Paint the bridge if desired.

8. Ensure the bridge is stable and safe for the goats to use.

4. DIY Goat Chew Toys

Materials Needed:

– Thick, untreated wood blocks

– Rope

– Drill

– Sandpaper

Procedure:

1. Choose thick, untreated wood blocks that are safe for goats to chew.

2. Cut the wood blocks to a manageable size for the goats.

3. Drill holes through the center of each block.

4. Sand down any rough edges to prevent splinters.

5. Thread a sturdy rope through the holes in the blocks.

6. Tie knots between each block to keep them spaced apart.

7. Knot the ends of the rope securely to prevent the blocks from slipping off.

8. Hang the chew toy in the goat enclosure at a convenient height.

5. DIY Goat Tunnel

Materials Needed:

– Large PVC pipes

– Saw

– Sandpaper

– Paint (optional)

Procedure:

1. Measure and cut the PVC pipes to the desired length for the tunnel.

2. Sand down any rough edges to prevent injuries.

3. Fit the pipes together to form a long tunnel.

4. Ensure the connections are secure and stable.

5. Paint the pipes if desired.

6. Position the tunnel in the goat enclosure.

6. DIY Goat Balance Beam

Materials Needed:

– Wooden planks

– Screws

– Nails

– Hammer

– Saw

– Measuring tape

– Sandpaper

– Paint (optional)

Procedure:

1. Measure and cut the wooden planks to the desired length for the balance beam.

2. Sand down any rough edges.

3. Cut additional planks to create supports for the beam at both ends.

4. Secure the beam to the supports using screws and nails.

5. Paint the balance beam if desired.

6. Position the balance beam in the goat enclosure at a safe height.

7. DIY Goat Swing

Materials Needed:

– Wooden board

– Rope

– Drill

– Sandpaper

– Paint (optional)

Procedure:

1. Choose a sturdy wooden board for the swing platform.

2. Cut the board to a suitable size.

3. Drill holes at each corner of the board for the rope.

4. Sand down any rough edges.

5. Thread a sturdy rope through the holes and knot securely underneath the board.

6. Securely tie the other ends of the rope to a sturdy tree branch or post.

7. Paint the swing if desired.

8. Ensure the swing is stable and safe for the goats to use.

8. DIY Goat Puzzle Feeder

Materials Needed:

– Large plastic container with lid

– Drill

– Sandpaper

– Rope

– Treats or hay

Procedure:

1. Choose a large plastic container with a lid.

2. Drill several holes in the sides and lid of the container.

3. Sand down any rough edges around the holes.

4. Fill the container with treats or hay.

5. Secure the lid tightly.

6. Attach a rope to the container for hanging or dragging.

7. Hang or place the puzzle feeder in the goat enclosure.

9. DIY Goat Seesaw

Materials Needed:

– Wooden plank

– Log or sturdy base

– Screws

– Nails

– Hammer

– Saw

– Measuring tape

– Sandpaper

– Paint (optional)

Procedure:

1. Measure and cut the wooden plank to the desired length for the seesaw.

2.  Sand down any rough edges.

3. Choose a log or sturdy base to balance the seesaw.

4.Secure the plank to the log or base using screws and nails, ensuring it can pivot safely.

5.Paint the seesaw if desired.

6. Position the seesaw in the goat enclosure.

10. DIY Goat Scratching Post

Materials Needed:

– Sturdy wooden post

– Sisal rope

– Nails

– Hammer

– Sandpaper

– Paint (optional)

Procedure:

1. Choose a sturdy wooden post.

2. Sand down any rough edges.

3. Wrap the sisal rope tightly around the post from top to bottom.

4. Secure the ends of the rope with nails.

5. Paint the post if desired.

6. Securely install the scratching post in the goat enclosure.

11. DIY Goat Obstacle Course

Materials Needed:

– Wooden planks

– Tires

– Rope

– Screws

– Nails

– Hammer

– Saw

– Measuring tape

– Sandpaper

– Paint (optional)

Procedure:

1. Design the layout of the obstacle course.

2. Use wooden planks, tires, and rope to create various obstacles like hurdles, tunnels, and balance beams.

3. Sand down any rough edges on the wooden components.

4. Assemble and secure each obstacle in the planned layout.

5. Paint the obstacles if desired.

6. Ensure all obstacles are stable and safe for the goats.

7. Position the obstacle course in the goat enclosure.

12. DIY Goat Climbing Wall

Materials Needed:

– Wooden board

– Climbing holds

– Screws

– Drill

– Measuring tape

– Sandpaper

– Paint (optional)

Procedure:

1. Choose a sturdy wooden board for the climbing wall.

2. Measure and cut the board to the desired size.

3. Sand down any rough edges.

4. Secure the climbing holds to the board using screws.

5. Paint the board if desired.

6. Securely install the climbing wall in the goat enclosure at a safe angle.

13. DIY Goat Tugging Toy

Materials Needed:

– Thick rope

– Old rubber tire

– Drill

– Sandpaper

Procedure:

1. Choose a thick, sturdy rope.

2. Drill holes in the rubber tire for the rope to pass through.

3. Sand down any rough edges around the holes.

4. Thread the rope through the holes and knot securely.

5. Knot the ends of the rope to prevent slipping.

6. Position the tugging toy in the goat enclosure.

14. DIY Goat Hay Feeder

Materials Needed:

– Wooden planks

– Screws

– Nails

– Hammer

– Saw

– Measuring tape

– Sandpaper

– Paint (optional)

Procedure:

1. Measure and cut the wooden planks to the desired size for the feeder.

2. Assemble the frame of the feeder using screws and nails.

3. Attach vertical slats to the front of the feeder, spaced evenly apart.

4. Sand down any rough edges.

5. Paint the feeder if desired.

6. Securely install the hay feeder in the goat enclosure.

15. DIY Goat Balance Logs

Materials Needed:

– Large logs

– Saw

– Sandpaper

Procedure:

1. Choose large, sturdy logs.

2. Cut the logs to the desired length.

3. Sand down any rough edges.

4. Arrange the logs horizontally in the goat enclosure.

5. Ensure the logs are stable and secure to prevent rolling.